DIN 34crnimo6 pahu kila poepoe 1.6582 pahu kila
Nā hiʻohiʻona
ʻO 34CrNiMo6 Steel kahi mea koʻikoʻi o ka ʻenekinia kila kila e like me BS EN 10083-3: 2006.34CrNiMo6 kila i kiʻekiʻe ikaika, kiʻekiʻe toughness a me ka maikai harden-hiki.
Hoʻohana ʻia ʻo 34CrNiMo6 i nā ʻoihana e like me ka mokulele, automotive, automotive, a me ka pale aupuni.Hiki iā 34CrNiMo6 ke hoʻomaʻamaʻa wela e like me ka normalizing, tempering, a me ke kinai ʻana.Hoʻohana ʻia ia no ka hana ʻana i nā kaulahao, nā ʻili, nā mea hana, nā lima, nā wili, a me nā ʻāpana mechanical ʻē aʻe.
Hōʻike
| Nui | Poʻapuni | 6-1200mm ka lōʻihi |
| Papa/Paa/Pake | mānoanoa | |
| 6mm-500mm | ||
| Laulā | ||
| 20mm-1000mm | ||
| Kaʻina hana | EAF+LF+VD+Forged+Hoʻomaʻamaʻa wela (koho ʻole) | |
| Hoʻomaʻamaʻa wela | Hana maʻamau ;Hanaia ;Ua kinai ;Huhū | |
| Kūlana ʻili | ʻeleʻele;Peeled;Hoʻomaʻamaʻa ʻia;Mīkini;wili;Huli;Milled | |
| Kūlana hoʻouna | Hana ʻia;ʻOwili wela;Huki anu | |
| Hoao | Ka ikaika tensile, ka ikaika hua, ka elongation, ka wahi o ka ho'ēmi, ka waiwai o ka hopena, ka paʻakikī, ka nui o ka palaoa, ka ho'āʻo ultrasonic, ka nānā ʻana o US, ka hoʻāʻo ʻana i ka ʻāpana magnetic, etc. | |
| Ka manawa hoʻouna | 30-45 mau lā | |
| Palapala noi | Hoʻohana ʻia ʻo 34CrNiMo6 no ka axle mīkini koʻikoʻi, ka pahi turbine shaft, ka ukana kiʻekiʻe o nā ʻāpana hoʻoili, nā mea hoʻopaʻa, nā ʻāpana crank, nā mīkini, a me nā ʻāpana i hoʻouka ʻia no ka hana kaʻa, etc. | |
ʻO ka hui kemika (%）
| Kalapona C | 0.3~0.38 |
| Silicon Si | 0.4 |
| Manganese Mn | 0.5-0.8 |
| Sulfur S | ≤ 0.035 |
| ʻO Phosphorus P | ≤ 0.025 |
| Chromium Cr | 1.3-1.7 |
| Nikela Ni | 1.3-1.7 |
| Molybdenum Mo | 0.15-0.3 |
Na Waiwai Mechanical
| Ka ikaika wili σ b (MPa) | 850~1400 |
| Ka ikaika hua σ s (MPa) | ≥690~1000 |
| ʻO ka lōʻihi δ (%) | ≥9~15% |
| ʻoʻoleʻa | 239~259 HB |
| Kūlike like ʻole | |
| Papa | Kūlana |
| 34CrNiMo6 (1.6582) | EN 10083-3 |
| 4337 | ASTM A29 |
Kūlana hoʻouna
Wela forged bar, ʻo ka maʻamau o ka hoʻopuka ʻana he wela forged, annealed/QT rough turn/Black surface.
ʻO ka pahu ʻōwili wela, ʻo ka mea maʻamau ke ʻano o ka lawe ʻana i ka wela wela, annealed/QT, ʻeleʻele.
Hoʻomanawanui
| Anawaena(mm) | Hoʻomanawanui | ||
| Paa Poe kila Forged | 80-600 | Ili ʻeleʻele:0~+5 | Mīkini ʻOʻohe a Huli ʻia:0~+3 |
| 650-1200 | Ili ʻeleʻele:0~+15 | Mīkini ʻOʻohe a Huli ʻia:0~+3 | |
| Paa Poepoe hao hao wela | 16-310 | Ili ʻeleʻele:0~+1 | Ihi:H11 |
| Bara Poe hao i unuhi anu anu | 6-100 | Ili ʻeleʻele:H11 | Ihi:H11 |
Pūʻolo
1.Ma nā pūʻolo, kēlā me kēia pūʻolo kaumaha ma lalo o 3 tons, no ka liʻiliʻi o waho
ke anawaena pa poepoe, kela puolo me 4 - 8 mau kaula kila.
2.20 kapuaʻi pahu i loaʻa ka ana, ka lōʻihi ma lalo o 6000mm
3.40 kapuaʻi pahu i loaʻa ka ana, ka lōʻihi ma lalo o 12000mm
4.By bulk moku, Freight uku haʻahaʻa e ka nui ukana, a nui
ʻAʻole hiki ke hoʻouka ʻia nā nui kaumaha i loko o nā ipu hiki ke hoʻouna ʻia e ka ukana nui
Palapala o ka maikaʻi: Hoʻopuka ʻia ma ka ʻōlelo Pelekania, me nā huaʻōlelo maʻamau, ke kaʻina hana, ka waiwai mechanical (ikaika hua, ikaika tensile, elongation a me ka paʻakikī), forged ratio, UT test result, Grain size, heat treatment method and the sample of is. hōʻike ʻia ma ka palapala hōʻoia o ka maikaʻi.
E kaha ana: Heat No. e hoʻopaʻa ʻia i ke anu a me ke kila kila, anawaena (mm), lōʻihi (mm), a pena ʻia ka mea hana LOGO a me ke kaumaha (kg).
ʻO ka hōʻoia maikaʻi
1. Koʻikoʻi e like me nā koi
2. Laʻana: Loaʻa ka laʻana.
3. Nā ho'āʻo: ho'āʻo paʻakai paʻakai/Tensile ho'āʻo / Eddy manawa / Chemical haku ho'āʻo e like me nā mea kūʻai mai noi
4. Palapala hōʻoia: IATF16949, ISO9001, SGS etc.
5. EN 10204 3.1 Hōʻoia
